Hard Water

Scale deposits are a typical indicator of hard water.

Hard water is a common quality of water which contains dissolved compounds of calcium and magnesium and, sometimes, other divalent and trivalent metallic elements.
The term hardness was originally applied to waters that were hard to wash in, referring to the soap wasting properties of hard water. Hardness prevents soap from lathering by causing the development of an insoluble curdy precipitate in the water; hardness typically causes the buildup of hardness scale (such as seen in cooking pans). Dissolved calcium and magnesium salts are primarily responsible for most scaling in pipes and water heaters and cause numerous problems in laundry, kitchen, and bath. Hardness is usually expressed in grains per gallon (or ppm) as calcium carbonate equivalent.

The degree of hardness standard as established by the American Society of Agricultural Engineers (S-339) and the Water Quality Association (WQA) is:

Degree of HardnessGrains per Gallon (gpg)ppm (or mg/L)
 Soft<1.0<17.0
Slightly Hard 1.0-3.517.1-60
Moderately Hard3.5-7.060-120
Hard7.0-10.5120-180
Very Hard>10.5>180

Comments

Popular posts from this blog

Arsenic in Your Water

Spread The Word! You Must Be A Registered Contractor With DORA to Sell Water Softeners.

COLORADO AB 20-1119—Signed into Law 6/29/2020 Grants the Department of Health and Environment the power to require public drinking water systems test for PFAS. It clarifies the Water Quality Control Commission may set standards related to PFAS in surface and ground water. Sponsor: Representative Tony Exum